Preparing The Telephone; Checking The Package Contents; Connecting The Base Station - switel DFT 1371 Bedienungsanleitung

2 Preparing the Telephone

Safety information
Attention: It is essential to read the Safety Information in
Chapter 1 before starting up.

Checking the package contents

The package contains:
Content
Base station with power adapter
plug
Charging station with power
adapter plug
Handset
Telephone connection line
Battery pack
Operating instructions
1
Visit www.switel.com to find out whether the telephone set is al-
ready available.
71
DFT 137X model
DFT DFT DFT DFT
1 1
1371 1372 1373 1374
1 1 1
− 1 2
1 2 3
1 1 1
1 2 3
1 1 1

Connecting the base station

Attention: Position the base station at least 1 m away from
other electronic devices, otherwise there is a risk of mutual
disturbance.
Connect the base station as illustrated in the diagram. For reasons of
safety, only use the power adapter plug and telephone connection line
supplied.
Telephone line socket
1
1
Mains power outlet
3
4
1
Your phone's base station is supplied with an energy−efficient swit-
4
ching power supply SSA−5AP−09EU060060 (Input 100~240 V
put 6 V , 600 mA). The adaptor input power without load is approx.
1 DC
0.15 W. The average efficiency is approx. 65 %.
The electrical consumption of the base is:
− in operation mode (idle/call): approx. 1.5 W
− during charging of the handset: approx. 2.5 W
The charger(s) delivered with a telephone set is/are supplied with an
energy−efficient switching power supply S002CV0600030 (Input
100~240 V , Output 6 V
AC
thout load is approx. 0.15 W. The average efficiency is approx. 60 %.
The electrical consumption of the charger is:
− without handset charging: approx. 0.15 W
− during charging of the handset: approx. 1.2 W
Preparing the Telephone
Important note
, 300 mA). The adaptor input power wi-
DC
, Out-
AC
83