Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
S
When the status LED flashes red, the battery must be
charged.
S
The status LED lights up red while the battery is being
charged.
Transmitter unit
1.
Connect the power adapter plug to the transmitter unit and a
properly installed mains power outlet.
2.
Position the transmitter unit near the baby/child (approx. 1.5 m to
2 m away) and ensure that the microphone is aligned towards
the baby/child for optimal transmission.
Ensure that the transmitter unit is out of reach of the baby/
child. Never place the transmitter unit in the baby's bed or
child's playpen!
3.
Press and hold the On/Off button for approx. 2 seconds to switch
the transmitter unit on. The Status LED lights up green.
4.
You can adjust the volume with the aid of the volume control.
Receiver unit
1.
Ensure that the power adapter plug is connected to a properly
installed mains power outlet or that the battery has been inserted
correctly according to the polarity and is fully charged.
2.
The receiver unit must be positioned near the supervising adult.
3.
Press and hold the On/Off button for approx. 5 seconds to switch
the receiver unit on. An acoustic signal is issued and
SEARCHING" appears in the display as long as a connection
has not been established to the transmitter unit.
4.
You can adjust the volume with the aid of the volume control.
39
Werbung
Inhaltsverzeichnis
