Use With An External Dmx Controller - MC Crypt DL-1006 Bedienungsanleitung

10. Operation
Symbol Option
Addr 001-503
ShNd Pr01
Pr02
Pr03
Pr04
Pr05
Pr06
Pr07
Pr08
Pr09
Pr10
Pr11
SPed SP01-SP32
SoUn on
oFF
ChNd 3Ch
10Ch
SLNd NASt
SLAv
LED on
oFF
dISP dISP
dSIP
b) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the controller.
This DMX starting address specifies the first DMX channel to which the effect light responds. The remaining control
channels come after this first DMX channel (DMX starting address).
The effect light requires three or ten free DMX channels.
Function
Setting the DMX starting address
Colour sequence controller with fade
Red, green, blue in sequence
All colours in sequence
Red flashing effect
Green flashing effect
Blue flashing effect
Yellow flash
Purple flash
Teal flash
White flash
Flash with colour change
Speed of the light effect slow > fast
Sound-to-light mode activated
Sound-to-light mode deactivated
3-channel DMX operation
10-channel DMX operation
Operation as a master device
Operation as a slave device
Display permanently on
Display switches on only after operation of the FUNC button
Display aligned normally
Display alignment turned by 180°
27