Use With An External Dmx Controller - MC Crypt DL-1112 Bedienungsanleitung

10. Operation
Display Option
Addr 001-512
VEr bC01
SoUn on
oFF
LED on
oFF
SLNd NASt
SL 1
SL 2
ShNd SP01
SP02
SP03
SP04
SP05
SP06
dISP dISP
dSIP
ChNd 1Ch
6Ch
b) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the controller.
This DMX starting address specifies the first DMX channel to which the effect light responds. The remaining control
channels come after this first DMX channel (DMX starting address).
The effect light requires one or six free DMX channels.
Function
Setting the DMX starting address
Display of the software version
Sound-to-light mode activated
Sound-to-light mode deactivated
Display permanently on
Display switches on only after pushing a button
Operation as a master device
Operation as a slave device (normal slave operation)
Operation as a slave device (inverted slave operation)
All automatic effects alternatingly
Automatic effect 1
Automatic effect 2
Automatic effect 3
Automatic effect 4
Automatic effect 5
Display aligned normally
Display alignment turned by 180°
1-channel DMX operation
6-channel DMX operation
25