Use With An External Dmx Controller - MC Crypt DL-1114S Bedienungsanleitung

10. Operation
b) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the controller.
This DMX starting address specifies the first DMX channel to which the effect light responds. The remaining control
channels come after this first DMX channel (DMX starting address).
The effect light requires 2 free DMX channels.
Setting the DMX starting address
• Push the button FUNC until Addr is displayed and push the button ENTER.
• Select the desired starting address 001-512 with the arrows.
• Confirm your selection again with ENTER.
The following tables provide information about the effects of the settings on the individual DMX channels.
DMX channel Value
1 000-009
010-049
050-255
2 000-009
010-031
032-063
064-095
096-127
128-159
160-191
192-223
224-255
26
Function
Light off
Sound-to-light mode
Automatic operation slow > fast
All automation effects alternatively
Automatic effect 1
Automatic effect 2
Automatic mode 3
Automatic effect 4
Automatic effect 5
Automatic effect 6
Automatic effect 7
Automatic effect 8