System Settings - Renkforce RF-DAB-Stereo1 Bedienungsanleitung

Station storage
• The device can save up to 10 FM stations.
• The station storage, selection of the stored stations and deletion of stored stations take place
as described for DAB operation.
Calling station information
• Push the button MENU/INFO (2) briefly to display various information on the station you are
listening to, the power supply method used for the radio (incl. battery charge status if active)
or the time and date in the second line of the display (4).
• Push the MENU/INFO button (2) once more to move to the next display.
• The contents of the displayed station information depend on the station.
Further operating options can be found in the menu
• Push the button MENU/INFO (2) for a longer time to display the menu.
• The following menu items refer to FM operation.
Scan setting
Audio setting
e) System Settings
• Push the button MENU/INFO (2) for a longer time to display the menu.
• Select the menu item System with the buttons PREV. (10) or NEXT (5) and push the button
SELECT/SNOOZE (9), to select the system menu.
• The following menu items refer to the system settings and can be called in any operating
mode.
36
Specifies whether the station scan is to find only strong stations
or all stations.
Specifies whether audio is received in mono or stereo.
For weak stations, mono reception is recommended, since this
produces less noise.