Dab Operation - Renkforce RF-DAB-Stereo1 Bedienungsanleitung

c) DAB Operation
Station scan
• If you cannot receive any DAB station after selecting DAB mode, push the button SCAN (8).
• The device will then perform a station scan in the DAB reception range as after first activation
and saves the stations found in the station list.
• During the search, the display (4) shows progress and the number of stations found.
The station scan should be repeated after a change of location or now and then in
order to transfer new stations to the station list.
Station selection from the station list
• Push the button PREV. (10) or NEXT (5), to select the desired station.
• Confirm your selection by pushing the button SELECT/SNOOZE (9).
Station storage
• The device can save up to 10 DAB stations.
• Select the other DAB station to be saved as described above.
• Press and hold the PRESET (3) button until the list of the station memory appears in the
display (4).
For empty station slots, no station name is displayed; if the station slot is already
occupied, the name of the station saved there is displayed.
• Use PREV. (10) or NEXT (5) to select the desired memory slot and confirm the selection by
pushing the button SELECT/SNOOZE (9).
• To delete a saved station, just save another station on its storage space.
Selection of stored stations
• Push the button PRESET (3) briefly and use the PREV. (10) or NEXT (5) button to select
the desired station.
• Confirm your selection by pushing the button SELECT/SNOOZE (9).
When no station is saved on the chosen station button, the currently set station will
continue to play.
34