C) Sound-To-Light Mode; Master-Slave Mode; Automatic Operation - MC Crypt DL-1112 Bedienungsanleitung

10. Operation

c) Sound-to-Light Mode

• Push the button FUNC until SoUn is displayed and push the button ENTER.
• Select on with the arrows to activate sound-to-light mode.
• Confirm your selection again with ENTER.
• The effect light is controlled via an installed microphone in time with the music.
d) Master-Slave Mode
• Push the button FUNC until SLNd is displayed and push the button ENTER.
• Select the NASt with the arrow buttons to define the effect light as master device (control via the integrated control-
ler).
• Select SL 1 with the arrow buttons to control the effect light in normal slave mode (control via the controller of the
connected master device).
• Select SL 2 with the arrow buttons to control the effect light in inverted slave mode (control via the controller of the
connected master device).
• Confirm your selection again with ENTER.
If the device is to be operated as a single device (stand alone), it must be defined as a master device.
Only one device in a master-slave-chain must be defined as master device. All other devices must be
defined as slave devices.
In inverted slave mode, the device behaves opposite to the master device.
e) Automatic Operation
• Push the button FUNC until ShNd is displayed and push the button ENTER.
• Select the desired automatic effect SP01 to SP06 with the arrows.
• Confirm your selection again with ENTER.
27