Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 15 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one SFc-10 lamp with up to max. 800 W.
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
14/32
00025650.DOC, Version 1.3
Werbung
Inhaltsverzeichnis
