Herunterladen Inhalt Inhalt Diese Seite drucken

Description Of The Device; Features; Overview; Installation - EuroLite LED FF-15 Fire Effect Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DESCRIPTION OF THE DEVICE

Features

• Creates effects like vivid flames • Rugged housing with mounting bracket • Locking possibility at the
mounting bracket • Easy operation • Operable in stand-alone mode or via DMX • DMX512 control possible
via any commercial DMX controller (occupies max. 3 channels) • Comfortable addressing and setting via
control panel with LED screen and three operating buttons • Functions: 4 internal programs in auto mode;
dimmer, motor-driven color wheel having 5 differnt dichroic color-filters with white and effect wheel rotating
speed via DMX; Master/Slave • When smoke is used, this effect becomes especially attractive • Equipped
with 1 x 15 W LED • Beam angle approximately 30° • Floor, ceiling or trussing installation possible • Ready
for connection via enclosed IEC power cord with safety-plug

Overview

(1) Floor-stand/mounting
bracket
(2) Fixation screw
(3) LED-screen
(4) Operating buttons: Mode,
Up, Down
(5) Safety rope
(6) Ventilation slots
(7) DMX-IN
(8) DMX-OUT
(9) Power supply
(10) Fuse

INSTALLATION

The LED FF-15 Fire Effect can be installed on the ground or on the wall or ceiling.

Attachment

Before attaching the device, make sure that the installation area can hold a minimum point load of 10 times
the device's weight.
The device must only be installed absolutely planar at a vibration-free, oscillation-free and fire-resistant
location. Make sure that the device is installed absolutely planar by using a water-level.
The device must be installed out of the reach of people.
The device must always be installed via all fixation holes. Do only use appropriate screws and make sure
that the screws are properly connected with the ground.
The durability of the installation depends very much on the material used at the installation area (building
material) such as wood, concrete, gas concrete, brick etc. This is why the fixing material must be chosen to
suit the wall material.
Always ask a specialist for the correct plug/screw combination indicating the maximum load and the building
material.
1
2
3
4
5
6
17/23
7
8
9
10
00065117.DOC, Version 1.1

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

51918549

Inhaltsverzeichnis