Waeco CoolMatic HDC195 Bedienungsanleitung Seite 49

HDC195, HDC225 Using the refrigerator
8.4 Replacing the interior light
If the interior light in the refrigerator is defective, you can change the bulb
(LED bulb, E14, 12/24 Volts, 1.2 watts).
HDC195
To do this, proceed as follows (fig. e, page 15):
➤ Disconnect the power supply.
➤ Press the moving part to detach the light cover (1).
➤ Take off the light cover (2).
➤ Replace the bulb with a new one.
➤ Attach the light cover.
➤ Reconnect the refrigerator to the power.
HDC225
To do this, proceed as follows (fig. f, page 15):
➤ Disconnect the power supply.
➤ Undo the screws in the light cover.
➤ Remove the cover.
➤ Unscrew the bulb from the socket.
➤ Screw the new bulb into the socket.
➤ Attach the light cover.
➤ Reconnect the refrigerator to the power.
49
EN