Telephoning; Taking Two Calls; Dialling Pause - switel DE102 Bedienungsanleitung

5

Telephoning

The way in which the telephone is operated is subsequently described by means of text and sym-
bols: If a button is depicted, it means that the respective button must be pressed.
In addition, the following symbols appear:
ë
2 sec —
{í}
{ì}
EXAMPLE
The ringing signals on the handset {í} and base station {ì} only function when they
have not been deactivated beforehand!
5.1 Taking a call
{ì} and {í}, ƒ
ƒ
When the handset is ringing, press the y or z button to adjust the
ringing volume.
If the ringing tone has been deactivated on the handset, incoming calls are only indica-
ted by the base station (as long as the base ringer has not been deactivated).
5.2

Taking two calls

You will hear acoustic signals (call waiting) if a second call is received while you are talking on the
telephone. The number of the second caller appears in the display. Press the buttons below in
the sequence described to switch between the two callers, the connection to the other caller is
put on hold.
R, 2
Caution: The functions for phone number display, holding calls and call waiting are
supplementary services offered by your telephone network provider. Contact your net-
work provider for further information.
5.3 Making a call
ë
ƒ
If you enter a wrong digit:
—
2 sec —
It is also possible to press the Call button ƒ first to obtain the dialling tone for an outside line.
Then enter the required telephone number. It is not possible to correct wrong digits individually
using this dialling procedure.
5.4

Dialling pause

In the case of private branch exchanges, it is necessary to dial a specific number (e.g. 9" or 0")
in order to obtain the dialling tone for an outside line. When using some older private branch ex-
changes, it takes a little time before the dialling tone becomes audible. Particularly in the case of
such private branch exchanges, it is useful to insert an automatic pause after the number for the
outside line so that the number can be dialled in a continuous process without having to wait for
the dialling tone.
Between pressing the number for an outside line and the phone number required, press the £
button once. P" appears in the display. After dialling the number for the outside line, the telephone
then waits 3 seconds before dialling the actual phone number.
The pause can also be entered with the phone number in the phone book.
5.5 Redialling
The telephone stores the last ten numbers dialled in a redialling list.
£
y or z, ƒ
If a phone number has been stored in the phone book, the name associated with it ap-
pears in the display.
− Telephoning −
Enter digits or letters
Press the button depicted for 2 seconds
Acoustic signal on the handset
Acoustic signal on the base station
Text or icon in the display
Take the call
End the call
Switch to other caller
Enter the phone number (max. 32 digits)
Dial the phone number
Press briefly: Deletes the last entry
Press longer: Deletes the entire phone number
Open the redialling list (the last phone number
dialled appears in the display)
Select an entry and dial the number
81