Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

13

Troubleshooting

Should problems arise with the telephone, refer to the following information first.
Faults
No telephone calls possi-
ble
Connection is disturbed or
cut off
Dialling not possible
The system no longer re-
sponds or is in an undefi-
ned state
The charging control lamp
does not light up
The battery icon flashes in
the display after a few
hours
Display is dark
The caller number display
(CLIP) does not function
In the case of claims under the terms of guarantee, contact your sales outlet.
− Troubleshooting −
Corrective measures
The telephone line is not connected properly or is defective.
Only use the telephone connection cable supplied.
Test whether the telephone connection is in order by using
another telephone.
The power adaptor plug is not plugged in or there is a com-
plete power failure.
The rechargeable standard batteries are empty or defective.
The handset is too far from the base station.
The handset is too far from the base station.
The base station is in an unsuitable location.
Dialling mode is set incorrectly.
Reset the default settings (refer to Section 12.1) Before do-
ing so, disconnect the power adapter plug briefly from the
power socket.
Place the handset correctly in the base station, clean the
contact surfaces on the handset and the base station with a
soft, dry cloth.
Place the handset in the base station for 14 hours. If this
does not help, replace the rechargeable batteries.
Caused by exposure to direct sunlight. Allow the handset to
cool down.
The caller number display function is an optional service
offered by telephone network providers. Contact your net-
work provider for further information.
The caller has suppressed the transmission of their phone
number.
95

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis