Safety Concept; Pressure Switch; Delivery, In-Company Transport And Storage; Delivery - Rothenberger BS 630 M Bedienungsanleitung

• The desired saw angle is set.
• The workpiece is inserted into the machine and clamped with min. two clamping belts
• Open saw band cover only in cross-sectional size of the workpiece.
• Switch on saw band and pull saw bow slowly forwards. The workpiece is sawed off.
• Push back saw bow
• The clamps on the workpiece are released, and the workpiece is removed from the machine.
4.3

Safety concept

4.3.1

Pressure switch

According to valid APR the BS 630 M must operate in jogging mode during processes that are
dangerous for the operator. This means that the operator must press the pressure switches of
the hand grip with both hands while sawing. As soon as the buttons are released, the motor of
the saw band stops.
Danger!
Running saw band may cause serious severance injury!
Descending saw bow may pinch the operator!
• The machine may only be operated by one person.
• Before running the saw band or lowering the saw bow, the operator must ensure
that the work area is clear.
• When starting the work process make absolutely sure that no body parts (arms,
hands, etc.) are within the danger area.
Warning!
Directly or indirectly touching live parts may result in electrocution!
The BS 630M is not disconnected when you release the pressure switch. The main
switch remains in position On.
Danger!
Danger of crushing during operation of the machine!
Crushing of limbs when pulling down the saw bow.
When starting the work process make absolutely sure that no body parts (arms,
hands, etc.) are within the danger area.
5

Delivery, in-company transport and storage

5.1

Delivery

• The BS 630M is delivered by a transportation company and off-loaded at the customer's oper-
ating site.
• On delivery, the machine is assembled together or partially assembled. If the machine is de-
livered partially disassembled, note mounting instructions (see Chap. 6.4).
• The screwed-on feet of the BS 630 M have been removed for transportation. The machine is
transported and delivered upright on wooden blocks.
 Immediately check the off-loaded machine for visible transportation damages. If the machine
has been damaged, document the details and promptly report this to the transportation
company and manufacturer.
 Check also if the delivery contents of the BS 630M are complete (see Chap. 3.2).
ENGLISH 47