The following table shows the personnel that is allowed to work with the machine in a particular
life-phase the qualifications that this person must possess.
Life-phase
Transport
Installation
Activation
Operation
Malfunction search
Maintenance
Storage
Deactivation
Dismantling
Disposal
2.6
Informal safety measures
Always keep the operating instructions on hand near the machine.
In addition to this operating manual, adhere to general and local accident prevention- and envi-
ronmental protection regulations.
• Ensure that all safety instructions and danger notices attached to the machine (see Chap. 1.7)
are legible and replace them if necessary.
2.7
Properly functioning of protective devices
All protective devices must be installed and function properly before starting up the machine
(see Chap. 7.2).
Protective devices may be removed for repair work –
• after the machine is idle and
• and after the machine has been secured against re-activation (e.g. locking the main switch)
2.8
Organizational measures
The proprietor of the BS 630M is obligated to provide the required personal protective equip-
ment. The personal protective equipment includes:
• Work clothing
• Safety glasses
• Protective gloves
• Hearing protection
• Lifting device for loading and unloading of pipes to be sawed
In case the machine is BS 630M operated with deactivated safety button, the operator must en-
sure the implementation of appropriate protective measures (e.g. safety fence) to keep the haz-
ard area clear of people during operation.
Furthermore, the proprietor must ensure the regular examination of all existing safety equipment
(see Chap. 9.7)
2.9
Other hazards
In the following you will find the overridingly valid safety instructions that are relevant for several
of the BS 630M life phases. Specific safety instructions are listed in the relevant sections of this
operating manual.
42
Instructed person
–
–
–
+
+
+
–
–
–
–
ENGLISH
Befähigte Person
+
+
+
+
+
+
+
+
+
+