Maintenance; Cleaning The Machine - Rothenberger BS 630 M Bedienungsanleitung

9

Maintenance

Danger!
Running saw band may cause serious severance injury!
Descending saw bow may pinch the operator!
Only one person may perform maintenance while the machine is turned off (excep-
tions described in respective context).
Warning!
Running saw band may injure the operator!
After releasing push buttons on the handle or deactivating the main switch, wait until
the saw band has come to a complete stop before entering the saw-band area.
Attention!
Perform all maintenance work thoroughly and on time.
All maintenance work in this manual must be performed thoroughly and on time to keep
the machine operational with a high uptime.
Attention!
Only use original spare parts.
For reasons of personal safety and to ensure the proper functioning of the machine, you
should only use original spare parts. It cannot be ensured that spare parts from other
manufacturers are constructed with the necessary strain-bearing- and safety capabilities.
Activity
Clean the machine
Check saw-band tension
Check safety equipment
Grease machine
DGUV Roule 3 examination (or
applicable national regulation)
Examination according to
IndSafReg §10 (2) (or accord-
ing to national regulation)
Before every maintenance activity (except for examination of safety equipment):
 Push saw bos in the rear home position.
If a workpiece is still in the machine, remove it (see Chap. 7.5).
 Turn the machine off at the main switch, and ensure it is not activated again.
After every maintenance activity:
 Record performed activities (except cleaning) in the maintenance protocol (see Chap. 9.8).
9.1

Cleaning the machine

Attention!
Do not used compressed air to clean the machine.
Compressed air blows shavings and dust into the machine guides, bearings and electri-
cal equipment. The machine may be damaged as a result.
Attention!
Plastic waste contaminates the environment.
Dispose of all shavings and plastic waste according to locally applicable legal stipula-
tions.
How often
Daily or after usage
Weekly
Weekly
Weekly
see DGUV Roule 3
Time limits according to §
3 Section 3 (Risk assess-
ment)
ENGLISH
Description
(see Chap. 9.1)
(see Chap. 9.2)
(see Chap. 9.7 )
Lubricate the hinge of the
saw frame
Request service technician
or authorized person
Request service technician
or authorized person
61