Environmental Hazards; Technical Data; General Information; Delivery Contents - Rothenberger BS 630 M Bedienungsanleitung

2.9.6

Environmental hazards

Attention!
Plastic waste and used saw bands contaminate the environment.
Dispose of all shavings, plastic waste and used saw bands according to locally applica-
ble legal stipulations.
3

Technical data

3.1

General information

Machine construction
• Robust, torsion-resistant machine stand and saw frame made of steel
• Saw-band redirection with ball bearings
• Compensation for warmth-induced expansion of the saw band with band-tensioning device
Cut quality
• Precision guides for straight cuts
• High saw-band speed for optimal cut quality
Operation
• Exact adjustment of saw angle possible with angle scale at front
• Adjustable miter on one side 0 ° to 45 ° by swiveling saw bow
3.2

Delivery contents

The delivery contents consist of:
• BS 630M
• 1 control box
• 2 saw band
• 9 plastic screw feet
• 1 operating manual
• V-Support (special equipment) screwed and positioned on the saw table
• 2 tension belts
3.3

Dimensions and weight

Length ........................................................................ 3100 mm
Width .......................................................................... 3150 mm
Minimal height ............................................................ 2150 mm
Maximum height (saw bow raised all the way) ............ 3050 mm
Weight with / without V-Support, ca. ........................... 335 kg / 325 kg
Transport dimensions (demounted in a box) :
Transport width ca. ..................................................... 1800 mm
Transport length ca. .................................................... 2700 mm
Transport height, ca. ................................................... 1350 mm
3.4

Equipment

Saw band:
Dimensions ............ 6140 x 25 x 0.9 mm
Tooth pitch (Tz) ..... 4 or 6 ZpZ (depending on wall thickness of workpiece)
Caution!
Saw bands that jump off the spool may injure the operator or cause material
damage.
Use original saw bands from the machine's manufacturer. Saw bands from other
providers may jump off the spool and injure the operator or cause material damage
to the machine or workpiece!
44 ENGLISH