Using The Usb Port - Silvercrest SCA 5.00 A2 Bedienungsanleitung Und Serviceinformationen

Using the USB port

®
Windows 7, Windows Vista
camcorder automatically as a mass storage device.
1. Please make sure that your camcorder is powered off.
2. Open the port cover and insert the connector of the USB/AV cable into the
USB/AV port (8) of your camcorder (see also page 15 – Rear Panel).
3. Plug the USB connector into a free USB port on your powered-on computer.
4. Press the On/Off button (18) to power the camcorder on. The computer will
detect the built-in memory and the memory card (if any) as a removable disk
and will create a new drive with the next available driver letter. The camcorder
display remains off and the power indicator (4) lights red.
5. Open My Computer on your PC and double-click on the new removable disk
drive. All recorded files can be found in a subfolder of the folder "DCIM" on
this disk drive.
6. Now you can copy the recorded files from the camcorder into a folder of your
choice on the computer's hard disk.
® ®
and Windows
SilverCrest SCA 5.00 A2
XP operating systems will detect the
English - 53