Photo Playback Menu - Silvercrest SCA 5.00 A2 Bedienungsanleitung Und Serviceinformationen

Volume
This function allows you to set the video playback volume.
1. Perform steps 1 to 4 from "Video Playback Menu" (see page 42).
2. Select "Volume" and press the confirmation button (7) to confirm.
3. Use the navigation buttons (10) or the  /  buttons on the display to select
the desired sound volume.
You can choose from volume levels between 1 (low) and 10 (high). If you
keep pressing the  button after the value 1 has been reached, a Mute icon
will appear and the sound output is disabled.
4. Press the confirmation button (7) or tap on the OK button to apply the selected
sound volume.
5. Press the Menu button (13) to return to the video playback menu.

Photo Playback Menu

1. Open the display and then rotate it according to your needs. The device
powers on automatically.
2. If the current mode is not set to photo capture, select it by using the mode
selector (6).
3. Press the playback button (14) to switch to photo playback mode.
4. Press the menu button (13) or tap on the bottom of the screen to display the
menu.
5. Press the  or  navigation button (10) to select the desired function and
then press the confirmation button (7) or tap on it on the display to open it.
6. Make the desired adjustments and tap OK.
7. Press the menu button (13) again or tap on the
The following sections contain a description of the different parameters available in
the photo playback menu.
SilverCrest SCA 5.00 A2
icon to hide the menu.
English - 45