Silvercrest SCA 5.00 A2 Bedienungsanleitung Und Serviceinformationen Seite 20

SilverCrest SCA 5.00 A2
Make sure that the battery clicks into place on the charger. Next connect the
power cord to the charger and plug the power cord to a wall outlet.
The status indicator of the charging cradle will light orange whilst the battery is
charging. When the charging process is completed, the status indicator will light
green. You can then insert the rechargeable battery into the camcorder.
Depending on the charge level, the charging cycle can take up to 2 hours.
If, after inserting the rechargeable battery, the indicator
remains green, this means the rechargeable battery is already
charged or it is not correctly inserted. In this case, check the
polarity.
18 - English
To power the camcorder, use only the rechargeable Lithium-
Ion battery FUJI ELECTRONICS (SHENZHEN) CO., LTD.
NP40.
Remove the rechargeable battery from the camcorder when
the device is not to be used for a long time.
During charging, the rechargeable battery and charging
device will become warm. This is not a malfunction.