Resistance Measurement; Continuity Buzzer - Monacor DMT-1020 Bedienungsanleitung

Overflow is again displayed with "1". Maybe with the
measurement or with the overflow indication the
minus sign is additionally displayed.
Caution! The multimeter is fused with a 200 mA/
250 V fuse, quick acting, including the 200 mA range.
The 10 A range is not fused!

Resistance measurement

Choose with the rotary switch a suitable resistance
range. With the measurement the resistance to be
tested must not carry any voltage.
With resistance measurements test cables which
are not connected represent an infinitely high resi-
stance. This is displayed as overflow "1".

Continuity buzzer

(Not with DMT-1010)
The switch position buzzer is used for checking
continuity and contact resistance. With values less
than approx. 1 kΩ there is the continuity buzzer
sound.
16