GRAPHITE 59G716 Betriebsanleitung Seite 11

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
●
Use only bits with appropriate shank diameter and bits suitable for the power tool rotational speed.
●
Some types of wood-like materials may produce dust during processing, use of dust mask and dust
extraction systems is recommended.
●
Do not use the router in environment with explosive vapours, gases and in proximity of explosive
materials.
●
Keep working tools clean. Tools should be sharp.
●
Do not use damaged cutters.
●
Ensure all locking clamps are tightened.
●
Keep collet sleeve and nut clean.
●
Use working tool suitable for the planned task.
●
Never attach working tools other than recommended by the manufacturer.
●
When changing cutter ensure its shank is held by at least 20 mm of its length.
●
Do not touch the working tool when the work is finished. It may be hot.
●
Prior to cutting ensure that there is enough free space under processed material to prevent contact of
cutter and other objects.
●
Check surface of the working area. Ensure there are no unwanted objects (nails, screws etc.).
●
After switching the router on, wait until it reaches its rated speed. If you hear suspicious noise coming
from the router, stop the tool and find the cause.
●
Hold the router by both handles during operation.
●
Do not overload the router by applying too great pressure. Weight of the tool is enough for processing.
●
Do not leave the router unattended, when switched on.
●
When not in use, the router should always be disconnected from power supply.
●
When not in use, the router should be stored in dry place and beyond reach of children.
●
Always disconnect the router from power supply prior to commencing any activity related to its
adjustment, maintenance or operation.
●
Check the ventilation holes to always be unobstructed.
●
Use only original parts and accessories.
●
When cleaning the router do not use any solvent that might damage plastic parts.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of operational injuries.
CONSTRUCTION AND USE
Router is a hand-held power tool with double-insulated body. It is driven by a single-phase commutator
motor. Power tools of this type are widely used for cutting in wood and wood-like materials. Range of
use covers woodworking, repair and building works and any work from the scope of individual, amateur
activities (tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Depth gauge adjustment knob
2. Knob for fine tuning of depth gauge rod
3. Wheel for spindle speed adjustment
ROUTER
59G716
DETAILED SAFETY REGULATIONS
11