Bohle GlassBuddy Plus Bedienungsanleitung Seite 24

Data transfer for the GlassBuddy
To transfer the data stored on your GlassBuddy to
your computer, first connect the device to your com-
puter using the supplied USB cable. Use the micro
USB slot on the GlassBuddy and a free USB slot on
your PC. Now switch the GlassBuddy on.
The display on the GlassBuddy will show PC
connection. The GlassBuddy is now connected to
your PC.
Now start the GlassBuddy PC application.
In the program screen you will see the field
Connected, which is shown in dark green. The
program is not yet connected to the GlassBuddy.
To connect, click the menu item Devices and then
select Update in the drop down menu.
The program is now connected to the GlassBuddy.
Once the connection has been established, the field
in the program screen below Connected will turn
light green. If this field does not turn light green,
click Devices - Update again.
To transfer the data stored in the GlassBuddy, click
on the menu item File and then on Transfer Data
in the drop down menu. After the data has been
successfully transferred, the measurement results
will appear in the pane list.
24 24
The transferred measurements can be stored on
your PC. To do this, click on the menu item File and
then on Save Data in the drop down menu. You can
then save the measurements under a file name of
your choice, then confirm with OK to save the data.
Calling up saved data
You can call up the data saved on the PC. To do this,
click on the menu item File and then on Open Data.
Select a saved series of measurements and confirm
with OK.