Operating Components; Preparation; Analogue Clock - Silvercrest SKIU 5 A1 Bedienungsanleitung

Operating components

(see fold-out page)
Figure A:

1 Analogue clock

2 UNIT button
3 Display
4 TARE button
Figure B:
5 Hanger
6 Time adjustment wheel
7 "Clock" battery compartment
8 "Scale" battery compartment

Preparation

Analogue clock
1) Remove the plastic strip from the "Clock" battery compartment 7.
2) Turn the time adjustment wheel 6 until the correct time is displayed.
NOTES ON CHANGING THE BATTERY
► Insert only one button-cell battery (type LR44).
To open the "Clock" battery compartment 7, turn the cover of the battery
►
anticlockwise a little way using a thin coin. The arrow on the battery com-
partment cover must point to the arrow behind OPEN next to the battery
compartment.
► Remove the cover and take out the old battery.
► Insert a new battery. Pay attention to the correct polarity: the "+" pole must
be facing upwards.
Place the cover on the "Clock" battery compartment 7 so that the arrow
►
on the cover points to the arrow behind OPEN next to the "Clock" battery
compartment 7. Turn the battery compartment cover in a clockwise direc-
tion until the arrow on the battery compartment cover points towards the
arrow in front of the word CLOSE.
The "Clock" battery compartment 7 is now closed.
GB │ IE
│
■ 6 SKIU 5 A1