Transport And Installation - Cola TERMO-FOCUS Serie Installations-, Bedienungs- Und Wartungsanleitung

Reference standards
1.7
Standard UNI 10683:2005 :
Standard UNI EN14785:2006 : Requirements for design, manufacture, construction, safety and performance,
Standard CEI EN 60335-1 :
Standard CEI EN 60335-2-102 : Safety of electrical appliances for domestic and similar use - part 2;
Standard CEI EN 55014-1 :
Standard CEI EN 55014-2 :
Standard CEI EN 61000-3-2 :
Standard CEI EN 61000-3-3 :
Standard CEI EN 62233 :
Standards DIN plus 51731 – UNI CEN/TS 14961 - Ö-Norm M 7135 :
Dataplate
1.8
The dataplate is visible on the inside of the pellet hopper door or on the back of the stove. It gives the following data:
Model
►
Serial number
►
Type of fuel
►
Nominal and reduced heat output
►
Consumption at nominal output and reduced output
►
Fume temperature at nominal output and reduced
►
output
Thermal efficiency
►
Power supply voltage
►
Stove decommissioning
1.9
When the stove is no longer to be used, disconnect it from the power supply, drain the water from the system and
heating chamber and empty all pellets from the hopper. For disposal, the stove must be sealed inside strong
packing; contact the local authority in charge of such operations in order to proceed according to the current local
regulations.
Instructions for requesting assistance and replacement parts
1.10
To request any assistance and/or replacement parts contact your dealer, area importer or the nearest authorised
service centre, clearly specifying the following: stove model, serial number, date of purchase, list of replacement
parts, details of faults or malfunctioning.
- All operations on components must be carried out by authorised and/or qualified personnel.
- Make sure all electrical connections are disconnected and that the stove is cold before any work on it.
- Only use original replacement parts.

2 TRANSPORT AND INSTALLATION

Packing, handling, shipment and transport
2.1
The stove complete with packing can be lifted using a lift truck, inserting the forks (of suitable length) in the special
spaces in the wooden pallet. Make sure the equipment used for lifting and transport can take the weight of the stove,
specified on the dataplate and in this manual.
Avoid taking the load in areas where it could be a danger if dropped.
Open the packing, remove the stove from the pallet and position it in the required place, making sure it complies with
that provided for.
Set the stove down on the floor carefully without bumping and position it in the required place. Make sure the floor
can take the weight of the stove, otherwise consult a specialised technician.
Disposal or recycling of the packing must be carried out by the end-user in compliance with the current local
regulations.
Installation requirements for heat generators burning wood or other solid biofuels;
instructions and marking, together with the relevant test methods for approval of
units burning pellets;
Safety of electrical appliances for domestic and similar use - part 1;
Electromagnetic resistance - Requirements for electrical appliances, electric tools
and similar electric equipment - Part 1: Emission of interference;
Electromagnetic resistance - Requirements for electrical appliances, electric tools
and similar electric equipment - Part 2: Immunity; Product family standard;
Limits for harmonic current emissions (Input current ≤16 A per phase);
Limitation of voltage fluctuations and flicker in low voltage supply systems for
equipment with nominal current ≤ 16 A;
Measuring methods for electromagnetic fields of electrical household appliances
and similar with reference to human exposure.
45
Standards regarding the specifications and
classification of pellets.
Electrical power input
►
Flue pipe size
►
Inlet pipe size
►
Min. draught
►
Stove external dimensions
►
Plumbing connection sizes
►
Safety distance from flammable materials
►
Weight
►
TERMO-FOCUS M