Cola TERMO-FOCUS Serie Installations-, Bedienungs- Und Wartungsanleitung Seite 60

4.6.1 Menu 01 – adjust fans
The item of menu 01, if enabled, adjusts the speed of the supplementary fans (not available).
4.6.2 Menu 02 – set clock
Before operating with the stove it is necessary to set the current time and date so that there is a reference for
possible chrono programming.
The electronic controller has a lithium battery giving the internal clock an autonomy of more than 3-5 years.
4.6.3 Menu 03 – enable chrono
Allows all chronothermostat functions to be enabled/disabled.
Regarding the selection and entering of times, use the six
buttons, following the table in par. 4.2.
By accessing the submenu: DAY PROGRAM, the daily
chronothermostat functions can be enabled/disabled and set.
It is possible to set two operation phases delimited by the times
set according to the following table where the OFF setting tells
the clock to ignore the command.
Selection Meaning
Activation time
Deactivation time
Activation time
Deactivation time
By accessing the submenu: WEEK PROGRAM it is possible to
enable/disable and set the weekly chronothermostat functions.
The weekly programmer has 4 independent programmes whose
final effect consists of a combination of the 4 programmings.
The weekly programmer can be activated/deactivated; also, by
setting OFF in the times field, the clock ignores the corresponding
command.
Carry out programming making sure not to overlap the
hours of activation and/or deactivation on the same day
in different programmes.
Possible values
60
Menu level
Input
Dialogue box
Menu level
Input
Dialogue box
Input
Dialogue box
TERMO-FOCUS M