Accessories Supplied - Cola TERMO-FOCUS Serie Installations-, Bedienungs- Und Wartungsanleitung

TERMO FOCUS pellet heating stove fire door opening - closing
Fire door opening-closing
handle;
- Opening: clockwise
- Closing: anticlockwise
Permissible use and fuel
1.5
The pellet stoves work exclusively on pellets in different types of wood complying with Standard DIN plus 51731 or
UNI CEN/TS 14961 or Ö-Norm M 7135 or having the following characteristics:
Heat value
Density
Moisture
Diameter:
Ash percentage
Length:
Composition:
Packing
The pellet hopper is at the back of the stove. The door is located in the top part and pellet loading occurs manually
only with the stove off, making sure not to overfill.
The use of pellets with characteristics different from those tested by the technician during first lighting involves a new
setting of the stove pellet loading parameters; this operation is not covered by the warranty.
-
dry place.
-
regular and efficient operation, pellets or other fuels cannot be manually loaded in the brazier
-
conforming fuels in the hopper.
-
bodies such as containers, boxes, bags, metals, etc., in the hopper.
- The use of poor quality and non-conforming pellets damages and compromises stove operation,
invalidating the warranty with the exclusion of liability of the manufacturer.

Accessories supplied

1.6
The supply includes:
Electrical power cable;
Installation, use and maintenance manual;
Opening - closing key;
Remote Control.
min. 4.8 kWh/kg (4180 kcal/kg)
680-720 kg
max. 10% weight
6 +0.5 m
max. 1.5% weight
min. 6 mm- max. 30 mm
100% untreated wood from the wood industry or post consumer without added binding
substances or bark, complying with current regulations
in bags made from environmentally friendly or biodegradable material or paper
To open the door, fit the handle
supplied and turn it clockwise
44
Store the pellets in a
For reasons of
Do not load non-
Do not load foreign
TERMO-FOCUS M