Inhaltsverzeichnis
Werbung
Side Broom
The side broom is used to clean corners and edges and to move the debris towards the main broom.
Side Broom Adjustment
The side broom must leave an "A Trail" on the ground as in the drawing (fig 4). To accomplish this it is necessary to adjust the broom height
to the ground as the bristles are wearing, operating on adjusting screw 1 (fig 4) loosening ring nut 2.
Side Broom Replacement
Remove the three screws 5, and the broom is disconnected from its support 4.
NOTE: When the walk-behind sweeper is not in use the side broom must always be lifted from the ground to avoid broom bristle bending.
Fig. 4 - Side Broom Trail
1
Side Broom Lowering Adjustment Nut
2
Ring Nut
Abb. 4 - Spur der Seitenbürste
1
Einstellschraube für seitenbürstensenken
2
Nutmutter
3
Hebeknopf für seitenbürste
4
Seitenbürstenhalterung
5
Befestigungsschraube der seitenbürste
A
Bürstenspur
15 - FORM NO. 041324 / RETRIEVER 350B
3
Side Broom Lifting Lever
4
Broom Support
Fig. 4 - Trace Brosse Latérale
1
Réglage abaissement brosse latérale
2
Collier
3
Pommeau soulèvement brosse latérale
4
Support brosse
5
Vis fixation brosse
A
Trace brosse
5
Broom Fastening Screw
A
Broom Trail
Fig. 4 - Traza del Cepillo Lateral
1
Ajuste bajada cepillo central
2
Casquillo
3
Pomo para la subida del cepillo lateral
4
Soporte cepillo
5
Tornillo de fijación del cepillo
A
Traza del cepillo
Werbung
Inhaltsverzeichnis
Fehlerbehebung
