Selecting The Language, Auto Tune; Auto Tuning - Toshiba 36ZP46 Bedienungsanleitung

Selecting the language, Auto tune

Before running Auto tune put your decoder and video recorder (VCR) to Standby if they are connected. To set
up the television use the buttons on the remote control as detailed on page 5.
To choose the required language, press MENU
1
and use R to select Set up from the top bar.
Press Q to highlight Language.
2
Set up
Language
Colour

Auto tuning

Manual tuning
Programme sorting
Teletext
EXIT : To exit
Press S or R to select.
3
Now press Q to highlight Auto tuning, then R
4
to select.
Set up
Language
Colour
Auto tuning
Manual tuning
Programme sorting
Teletextset up
OK
For UK only: Press
5
For Contintental Europe: You will need to choose
the System necessary for where you live.
Auto tuning
Previous settings
will be lost!
EXIT for no change.
OK : START
EXIT : To exit
ENGLISH
AUTO
ENGLISH
AUTO
to start and go to step 7.
B/G – Continental Europe,
D/K – Eastern Europe, L1, L2 – France
Press R to select your System. Press Q to
6
highlight START and then R .
The search will begin for all available stations.
7
will flash and the bullet will move along
x x x x x x x x x x
the line as the search progresses.
You must allow the television to complete
Auto tuning
EXIT : To exit
When the search is complete the television will
8
automatically return to programme position 1.
This may not be a clear picture or the signal may
be weak, so the station order may be changed by
using Programme sorting, on page 12.
If the television cannot be connected to a
VCR/decoder with a SCART lead or if a station on
another system is required use Manual tuning to
allocate a programme position, see page 10.
9
I
– UK
the search.
Searching
Channel : 28
Station :