Dolby Digital; Delay Time; Sound Adjustment - Toshiba 36ZP46 Bedienungsanleitung

Dolby Digital (

Dolby Digital is available from DVD players, some games console players, etc. These must be connected
using a SCART or phono lead for the picture and an optical or a coaxial cable for the sound.
Arrange the speakers as shown on page 6 then set up
the television as follows:
Connect the DVD to the television using phono
1
leads to the COMPONENT VIDEO INPUT or a
SCART lead to EXT 2, and an optical or coaxial
cable to the optical/coaxial sockets, DA-1 or DA-2.
Set the Digital input-1 in the AV connection
2
menu (see page 16) to EXT 2 if SCART 2 is used
or EXT 4 if the equipment is connected to
COMPONENT VIDEO INPUT.
If external front speakers are connected the
3
External speaker switch on the back of the
television must be set to EXT (see page 6). The
centre channel will not be heard without external
front speakers connected.
Make sure the rear speakers are connected, then
4
in the Feature menu press Q to select
Surround set up. Use R to set the Rear speaker
option in the Surround set up menu to YES.
Press Q to select Surround out and set the
5
option to SP OUT (Surround speakers out).
Surround set up
Back
Rear speaker
Surround out
Surround test

Delay time

If an external amplifier is to be used to power the
surround speakers set the Surround out option
to EXTERNAL.
No sound will come from the surround sound
terminals if this option is chosen.
Surround set up
Back
Rear speaker
Surround out
Surround test
Delay time
If the Rear speaker option is set to NO, no
sound will be heard from the rear speakers and
the Surround out option will not be selectable.
ZP48 models only
YES
SP OUT
YES
EXTERNAL
18
Delay time
If the rear speakers and seating are a long way from the
television, the sound from the rear speakers will reach
you before the sound from the front. A higher setting in
the Delay time option can restore the correct balance.
Select Surround set up from the Feature menu.
1
Select the Delay time option, use S or R to adjust
2
the setting to a suitable value.
Press EXIT to finish.
3

Sound adjustment

Set the volume and balance of the front speakers.
1
Play a Dolby Digital film and press
2
remote control. The Surround menu will appear
giving an indication of the channels available e.g.
Dolby Digital 3/2 (see the table).
Press P and Q to select the speakers, then use
3
S or R to adjust. The number of adjustable
speakers will depend upon the signal received
from the DVD player.
Press EXIT to finish. Alternatively select Surround
4
test in the Surround set up menu.
In order to get full Dolby Digital the DVD
player must be connected using the coaxial
or optical links.
Dolby Digital
1/0 = Centre speaker only.
2/0 = Front Left and Front Right only.
2/1 = Front Left and Front Right +
Rear Left and Rear Right combined.
2/2 = Front Left and Front Right +
Independent Rear Left and Independent
Rear Right.
3/0 = Front Left and Front Right and Centre.
No Rear Speakers.
3/1 = Front Left and Front Right and Centre +
Rear Left and Rear Right combined.
3/2 = Front Left and Front Right and Centre +
Independent Rear Left and Independent
Rear Right.
)
on the
M