Auto Tune; General Controls - Changing Programme Position, Time Display; Stereo And Bilingual Transmissions - Stereo/Mono Or Dual Language Broadcasts - Toshiba 46WM48 Series Bedienungsanleitung

Auto tune, general controls, time display,
stereo/bilingual transmissions
Using Auto tuning
To set up the television using Auto tuning, press
1
MENU and use S or R to select the SET UP menu.
SET UP
Language
Country
Auto tuning
Manual tuning
Programme sorting
MENU Back EXIT Watch TV
Press Q to highlight Language and S or R to
2
select.
Using Q highlight Country, then S or R to select.
3
The television will now tune the stations for your
country.
Press Q to highlight Auto tuning, then press OK.
4
Auto tuning
!
Previous settings will be lost!
Press EXIT for no change.
Press OK to start Auto tune
System
MENU Back
Your System will have been selected, if there is a
5
choice, press S or R to select from the systems
displayed, then press OK.
B/G – Continental Europe,
D/K – Eastern Europe, L1, L2 – France
You must allow the television to complete the search.
When the search is complete the television will
automatically select programme position 1. This may not
be a clear picture, so the station order can be changed
using Programme sorting, see page 9.
English
UK
OK
OK
OK
I
EXIT Watch TV
I
– UK
Selecting programme positions
To select a programme position use the numbered
buttons on the remote control.
For programme positions below 10 use 0 and the
required number e.g. 01 for programme position 1.
Programme positions can also be selected using P
and P
(Q).
e
To revert to the previous programme position press
To display on-screen information i.e. programme position,
input mode or stereo/mono signal, press CALL.
The Time Display
The time display facility allows the current (teletext) time to
be seen on the television screen.
/
Press 8 9 whilst watching a normal television
broadcast to see a time display from the broadcaster. It
will remain on screen for about 5 seconds.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Stereo... Press
O
Bilingual... Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press
O
12
Mono will appear.
to select Stereo or Mono.
I/II
to select Dual 1, Dual 2 or Mono.
I/II
( P )
f
.
^ ^