Picture Controls; Colour Temperature - Toshiba 36ZP46 Bedienungsanleitung

Picture preferences
This television offers the choice of personalising the picture
m
style. Press to view the different styles available:
Picture mode-1 to 3 are preset options and
Picture mode-M stores your own settings:
Select the Picture menu.
1
Picture
Contrast
Brightness
Colour
Tint
Sharpness
Scan mode
DNR
EXIT : To exit
Use S or R to adjust the Contrast, Brightness,
2
Colour, Tint and Sharpness.
The Tint can only be adjusted on a signal from an
NTSC video recorder or DVD player when the
television is in AUTO or NTSC colour mode.
Scan mode
Scan mode has four options.
NATURAL, ACTIVE and 100Hz settings run at 100Hz
and reduce background flicker. The NATURAL setting
normally gives the better picture, but for programmes such
as football matches ACTIVE or 100Hz may give a
smoother result.
PROGRESS. (Progressive) has 50Hz vertical scan but the
equivalent of 100Hz horizontal scan.
Select Scan mode from the Picture menu.
1
With S or R select NATURAL, ACTIVE, 100Hz or
2
PROGRESS. to choose the best picture – the
difference may only be slight.

Picture controls

50
50
50
0
0
NATURAL
AUTO
M
14
DNR – Digital Noise Reduction
DNR enables you to 'soften' the screen representation of a
weak signal to reduce the noise effect.
Select DNR from the Picture menu. Select
1
between AUTO and OFF to obtain the best picture.
The differences may not always be noticeable.
Black Stretch
Black Stretch increases the strength of dark areas of the
picture which improves definition.
Select Black Stretch from the Picture menu by
1
pressing Q until the lower section of the screen
appears.
Press S or R to select between ON and OFF. The
2
effect depends on the broadcast and is most
noticeable on dark colours.
Picture
Contrast
Brightness
Colour
Tint
Sharpness
Scan mode
DNR
Black Stretch
Colour Temp.
EXIT : To exit

Colour Temperature

Colour Temp. increases the 'warmth' or 'coolness' of a
picture by increasing the red or blue tint.
Select Colour Temp. from the Picture menu by
1
pressing Q until the lower section of the screen
appears.
Press S or R to select between NORMAL, WARM
2
and COOL to suit your preference.
50
50
50
0
0
NATURAL
AUTO
M
ON
NORMAL