Picture Controls; Picture Position - Analogue Only; Backlight - Toshiba Z3030 Series Bedienungsanleitung

Most of the picture controls and functions are available in both digital and analogue modes. To access the
required menus when in digital mode: press MENU and using
select the desired menu. PLEASE NOTE: features not available in digital mode will be greyed out. To access the
required menus when in analogue mode: press MENU and use
Picture position – analogue only
The picture position may be adjusted to suit personal
preference and can be particularly useful for
external inputs.
In the SET UP menu press
1
Picture position is highlighted.
Picture position
Quick Setup
MENU Back EXIT
Press OK to view the options available for the
2
picture format that has been selected.
Press and to select an option, then
f e
3
to adjust the settings.
The options alter depending on the widescreen
format chosen and when viewing connected
equipment.
In Cinema 2:
Picture position
Horizontal position
Vertical position
Reset
Back
MENU EXIT
To return to the original factory settings select Reset
in the Picture position menu and press OK.

Picture controls

until
e
SET UP 2/2
OK
OK
Watch TV
or
z x
0
0
OK
Watch TV
select TV setup, press OK then
e
or to select the desired menu.
z x
Adjusting the Backlight can improve the clarity of the
In the PICTURE menu press
1
Picture settings, then press OK.
Picture settings
Active Backlight Control
Cinema mode
Film Stabilization
Active Vision M100
xvYCC selection
MENU Back
In the Picture settings menu press
2

Backlight.

Press or
z
3
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Back
MENU
22
z
Backlight
screen when viewing.
to select
e
PICTURE
OK
On
On
Off
On
EXIT Watch TV
e
to adjust.
x
Picture settings
100
100
50
50
0
0
Watch TV
EXIT
or to
x
1/2
to select
1/2