Picture Controls - Colour Temperature, Lamp Mode, Automatic Format (Widescreen), Blue Screen - Toshiba 46WM48 Series Bedienungsanleitung

Colour Temperature
Colour Temperature increases the 'warmth' or 'coolness'
of a picture by increasing the red or blue tint.
In the PICTURE menu press Q until Colour
1
Temperature is highlighted.
Press S or R to select between Normal, Warm
2
and Cool to suit your preference.
PICTURE
Sharpness
DNR
Black stretch
Colour Temperature
Lamp mode
MENU Back EXIT Watch TV
Lamp mode
The Lamp mode has two options. The High bright mode
is for use where additional screen brightness is required
such as in a room where the lighting is bright. The
Low power mode reduces wear on the projection lamp.
This will prolong the life of the lamp and it is
recommended that the lamp stays in this mode as much
as possible.
In the PICTURE menu press Q until Lamp mode
1
is highlighted.
Press S or R to select between High bright and
2
Low power to suit your preference.
PICTURE
Sharpness
DNR
Black stretch
Colour Temperature
Lamp mode
MENU Back EXIT Watch TV
Picture controls
0
2
On
Normal
Low power
0
2
On
Normal
Low power
16
continued
Automatic format (Widescreen)
When this television receives a true Widescreen picture and
Auto format is On, it will automatically be displayed in
Widescreen format, irrespective of the
television's previous setting.
Select Auto format from the FUNCTION menu,
1
then select On or Off.
FUNCTION
Teletext
Panel lock
Auto format
Blue screen
Quick restart
MENU Back EXIT Watch TV
Blue screen
When Blue screen is selected the screen will turn blue
and the sound will be muted when no signal is received.
In the FUNCTION menu press P or Q to
1
highlight Blue screen.
Press S or R to select On or Off.
2
FUNCTION
Teletext
Panel lock
Auto format
Blue screen
Quick restart
MENU Back EXIT Watch TV
Auto.
Off
On
On
On
Auto.
Off
Off
On
On