Changing Vacuum Level; Placing Out Of Operation After Use - Medela Basic 30 Gebrauchsanweisung

CAUTIONS
When the Basic 30 is used for wound drainage, the negative pressure should be set
according to instruction of the specialist and not cause any wound damage.
7.3
Changing
vacuum level
7.4
Placing out of
operation after use
18 |
Operating instructions
1.
1.
2.
3. Clean and desinfect the Basic 30. See chapter 14.
1.1 Clamp patient tubing
1.2 Turn vacuum regulator to
select the correct vacuum
according to the particular
application.
1.3 Check vacuum gauge for
setting.
1.1 Press on/off switch to
switch off the Basic 30.
2.1 Disconnect the mains plug
from the fixed mains
socket.