Assembly And Removal Of Track Sprocket - CAMPAGNOLO PISTA Bedienunganleitung

5. ASSEMBLY AND REMOVAL OF TRACK SPROCKET

WARNING!
Always wear protective gloves and glasses while working
on the sprockets.
5.1 - ASSEMBLY OF TRACK SPROCKET
• Take the track sprocket suitable for assembly on the hub of the PISTA
wheels.
• Remove the lock ring (A - Fig. 6) from the hub, unscrewing it clockwise.
• Grease the hub threading.
• Fit the track sprocket (B - Fig. 7) on the threaded body of the hub, tigh-
tening it clockwise up to the end-stop, using a chain wrench,
Campagnolo ® code UT-CS060.
• Fit the lock ring (A - Fig. 8) on the threaded body of the hub, tightening it
counterclockwise up to the end-stop.
7
8
B
6
8
A
A