Care And Maintenance; Main Unit; Tank; Sensors - Sharp KC-6400E Benutzerhandbuch

CARE AND MAINTENANCE

To maintain optimum performance of this air purifier, please clean the unit including the
sensor and filters periodically.
When cleaning the unit, be sure to unplug the power cord, and never handle the plug with
wet hands. Electrical shock and/or bodily injury may occur as a result.

MAIN UNIT

Care Cycle 1 month
To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to
remain, they may become hard to clean.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
Do not use volatile fluids
Benzene, paint thinner, polishing powder, etc., may damage the surface.
Do not use detergents
Detergent ingredients may damage the unit.
Keep the unit away from water

TANK

Care Cycle Every water supply
With a small amount of water inside and the tank cap closed, wash
the tank set by shaking it.
When using a kitchen detergent, dilute the detergent with water and
rinse it thoroughly.

SENSORS

Care Cycle 2 months
Remove dust from the surface of the hole of
the sensors using a vacuum cleaner.
KC-6500E
KC-6400E
(*DUST SENSOR, ODOUR SENSOR, TEMPERATURE/HUMIDITY SENSOR)
Opening of Odour
Sensor
Opening of
Temperature/Humidity
Sensor
Opening of Dust
Sensor
Opening of
Temperature/Humidity
Sensor
Opening of
Odour Sensor
E-16
*
Only KC-6500E is equipped with the Dust sensor.
SENSOR FILTER CARE
(The sensor Filter is in the sensor cover.)
Detach the sensor filter and tap it lightly with
your hand to remove the dust.
If it is very dirty, wash it with water and then
allow it to dry thoroughly.
Tank Cap
Tank
(KC-6500E only)
Sensor Cover
Sensor Filter
It does not have a front
and a back.