Maintenance And Troubleshooting - Jung Pumpen Pentair BIOX XS 300/10 Betriebsanleitung

EN
CHAPTER 5

MAINTENANCE AND TROUBLESHOOTING

DANGER - ELECTRIC SHOCK RISK
Before doing any operation, make sure pump is disconnected from electric current
network.
DANGER - ELECTRIC SHOCK RISK
Power cord must be replaced by manufacturer or by Customer service, using special
tools.
No maintenance is required when BIOX XS range pumps operate in normal conditions.
Occasionally maintenance of liquid ends and replacement of impeller may be required.
FAULT
PUMP DOES NOT DELIVER,
MOTOR DOES NOT RUN
PUMP DOES NOT DELIVER, MO-
TOR RUNS
PUMP DELIVERS REDUCED
WATER
INTERMITTENT WORKING
8
POSSIBLE CAUSE
1) No electric current supplying.
2) Incorrect plugging in .
3) Circuit-breaker come into operation.
4) Impeller blocked.
5) Motor or capacitor damaged.
1) Filter obstructed.
2) Non return valve blocked.
1) Filter partially obstructed .
2) Delivery pipe partially obstructed.
3) Impeller worn off.
4) Anticlockwise rotation (three phase
version).
1) Solids obstruct impeller.
2) Too warm liquid.
3) Motor broken.
REMEDY
-
Verify presence of electric current
supply and plug in.
Reinforce circuit-breaker. Please call
electrician in case circuit-breaker
comes again into operation.
Remove obstacle.
Call dealer.
Clean filter.
Clean or replace valve.
Clean filter.
Remove obstacles.
Replace impeller.
Inverse two phases.
Remove obstacles.
-
Call dealer.