Supplied Accessories; Features - Panasonic AG-CA300G Bedienungsanleitung

Supplied Accessories

VF cable a 1
REMOTE cable a 1

Features

This unit has the following features:
This unit is connected with the base station
(AG-BS300P/E; optional) with a power supply
cable (refer to page 23 for specification) and 2
BNC cables, and it supplies the power to the
camera recorder while transferring the video
and audio signals being recorded with the
camera recorder.
Since the signal between the unit and the base
station is transmitted as an uncompressed
digital signal, it is possible to transmit the video
and audio signal being recorded on the camera
recorder without any degradation.
It is possible to extend the distance between
the unit and the base station up to 100 m.
(When using 5C-FW BNC cable)
It is possible to transfer one line of the return
video (RET). (2 lines of transfer are possible
depending on the mode.)
Cable strap a 2
Battery plate a 1
Ferrite core a 1
It is possible to transfer one line of the intercom
(INCOM).
It is possible to operate with DC.
The unit is compatible with multi-format.
E-6