About The Power Supply Cable - Panasonic AG-CA300G Bedienungsanleitung

About the Power Supply Cable

Use the power supply cable with the following specifications with this unit.
The extension length of 100 m cannot be maintained between the base station and the unit especially if
the resistance value is larger than the following specifications.
(CE01-6A18-11SC-D0;
to the unit)
1) Conductor resistance: 0.5 h or less
(Real cross-section area of the conductor: 3.5 mm
2) Structure
Number of wires: 4
Cross-section area of each wire: 1.75 mm
3) Withstanding voltage
AC 60 V or higher
Real applied voltage: DC 24 V
4) Stranding pitch
Stranding pitch for 4 wires: 110 mm
CE01-6A18-11SC-D0
110 mm
1
Standby
GND 2
3
24 V
Standby
4
Standby
5) Finished external dimensions
10 mm or less
E-23
2
CE01-6A18-11PC-D0
Standby
1
2
GND
24 V
3
Standby
4
Standby
(E48897, AWM 2517 105C 300 V VW-1)
(CE01-6A18-11PC-D0;
to base station)
2
)
6) End connector part numbers
AG-CA300G side: CE01-6A18-11SC-D0
AG-BS300P/E side: CE01-6A18-11PC-D0
7) Part number of cables
(with end connectors)
DC50V10-CE01PS-SC (50 m)
DC100V10-CE01PS-SC (100 m)
E48897, AWM 2517 105C 300 V VW-1
(Manufacturer: Canare Electric)
(Manufacturer: DDK Ltd.)
(Manufacturer: DDK Ltd.)