Resistance Measurement - Ht Instruments Ht9015 Bedienungsanleitung

4.3.3. Resistance measurement

Before taking any in circuit resistance measurement, remove power from
the circuit to be tested and discharge all the capacitors.
1. Rotate the switch on Ω
2. Insert the red test lead plug into VΩ
plug into COM jack (Fig. 5)
3. Connect the two long ends of test leads to the desired circuit, then reading will be
displayed
4. When "O.L." symbol is displayed, the result under test exceeds the maximum value
that the instrument is capable of measuring
5. For HOLD and MAX/MIN features please refer to § 4.2
Fig. 5: Taking Resistance measurement
CAP position
EN - 10
CAUTION
CAPHz%Temp jack and the black test lead
HT9014 - HT9015