Danfoss TripleLynx 8 kW Benutzerhandbuch Seite 5

1. Introduction
Fail Safe (Red LED flashing)
1
If the inverter detects an error in its circuits during the self-test (in connecting mode) or during
operation, the inverter goes into fail safe mode. The inverter will remain in fail safe mode until
PV power has been absent for a minimum of 10 minutes, or the inverter has been shut down
completely (AC + PV).
Refer to the section on
4
Troubleshooting for further information.
L00410310-07_2q