Danfoss TripleLynx 8 kW Benutzerhandbuch Seite 18

Incorrect setting can have serious consequences for production efficiency.
Illustration 3.5: Step 4 of 7: Installed Power
To change the installed power, refer to
Step 5 of 7: Grid code
Select the grid code to match the location of the installation. To meet medium-voltage grid re-
quirements select a grid code ending in MV.
• The default setting is [undefined].
Select the grid code again, to confirm.
• The setting is activated immediately.
Correct selection is essential to comply with local and national standards.
Setup, Calibration, PV Array .
L00410310-07_2q
3. Web Server Quick Guide
3
17