Danfoss TripleLynx 8 kW Benutzerhandbuch Seite 19

3. Web Server Quick Guide
3
Illustration 3.6: Step 5 of 7: Grid Code
Note:
If the initial and confirmation settings are different,
If initial and confirmation settings match, but are incorrect, contact service.
Step 6 of 7: Replication
To replicate the settings from steps 1 to 6 to other inverters in the same network
•
•
Note:
When the PV configuration, installed PV power and PV array area of follower inverters in the
network differ from that of the master, do not replicate. Set up the follower inverters individ-
ually.
Illustration 3.7: Step 6 of 7: Replication
18
• grid code selection is cancelled
• the wizard recommences step 5
Select inverters
Click [Replicate]
L00410310-07_2q