Monacor DMT-3040 Bedienungsanleitung Seite 23

Max. measuring voltage: . 250 mV
Overload protection: . . . . . 250 V / ~
Continuity buzzer
Response threshold:. . . . . < 50 Ω
Max. measuring voltage: . 0.5 V
Overload protection: . . . . . 250 V / ~
Diode test
Reading: . . . . . . . . . . . . . . approximate forward voltage up to 1.5 V
Test current: . . . . . . . . . . . approx. 1 mA
Overload protection: . . . . . 250 V / ~
Transistor test
Measuring range (h
Test conditions: . . . . . . . . . I
Fuse protection: . . . . . . . . fuse F200 mA / 250 V
Temperature
Measuring range: . . . . . . . -20 °C to +1000 °C or 0 °F to 1800 °F
Measuring accuracy*
-20 °C to 0 °C: . . . . . . . ±(5 % + 4 digits)
0 °C to 400 °C: . . . . . ±(1 % + 3 digits)
400 °C to 1000 °C: . . . . ±(2 % + 3 digits)
Temperature sensor:. . . . . K type
Overload protection: . . . . . 250 V / ~
General information
Display: . . . . . . . . . . . . . . . 24 mm LCD, 3
Measuring rate:. . . . . . . . . approx. 2.5 measurements per second
Power supply: . . . . . . . . . . 3 x 1.5 V battery size AAA
Range of application: . . . . 0 – 40 °C, rel. humidity < 75 %
Dimensions: . . . . . . . . . . . 75 x 160 x 35 mm
Weight: . . . . . . . . . . . . . . . 220 g
*at 23 °C, ±5 °C
Subject to technical modification.
All rights reserved by MONACOR
No part of this instruction manual may be reproduced in any form or by
any means for any commercial use.
):. . . 0 – 1000
FE
= 2 µA, U
B
® INTERNATIONAL GmbH & Co. KG.
= 1 V
CE
/ digits
1
2
GB
23