Connecting The Transmitter; Connecting The Receiver - Silvercrest KH 2131 Bedienungsanleitung

Handling and operation

Connecting the transmitter

Insert the jackplug of the cinchplug - jackplug cable
socket
Connect the cinch plug of the cinchplug - jackplug cable
source, for example, a DVD player. Pay heed to the colour coding.
If the signal source makes the output signals available to you via a Scart
output, use also the Scart to cinchplug adapter OUT (Transmitter)
If need be, you can connect a second signal source to the transmitter.
For this, use the socket AV2 IN
NOTICE
► If, despite an occupied A/V output, you wish to additionally connect the
used signal source to a TV, connect the TV with the transmitter via the
socket TO TV
jackplug cables
Connection example transmitter).
Connect the infrared transmission diode cable
transmitter.
Aim one of the three transmitter diodes at the device to be remotely controlled.
Attach the transmitter diode at an appropriate location using the supplied
double-sided adhesive pads. The transmitting diode should be affi xed
immediately adjacent to the IR receiving diode on your device (see Fig.
Connection example Transmitter).
Connect one of the power adapters to the DC IN
and then plug it into a properly installed mains power socket.
Unfold the transmission antenna

Connecting the receiver

Connect the video output
e.g. a television. For this, use the supplied Cinch to Cinch cable
Pay heed to the colour coding.
If the target device has a Scart input, use additionally the Scart - Cinch
adapter IN (Receiver)
Connect one of the power adapters to the DC IN
and then plug it into a properly installed mains power socket.
Unfold the transmission antenna
KH 2131
of the transmitter.
8
. To do this, use either one of the supplied cinchplug -
7
, or an identical cable from a dealer (see Figure
22
and the audio outputs
18
.
23
22
.
9
to the socket IR
25
socket of the transmitter
10
and point it in the direction of the receiver.
19
socket of the receiver
20
and point it in the direction of the transmitter.
13
in the AV1 IN
to the signal
22
.
24
of the
6
to the target device,
.
27
GB
IE
9