Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Accessories; Guarantee - Solo 440 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für 440:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

11. Technical data

Blower tube/ Vacuum shredder
Engine type
Engine capacity cm 3
Fuel tank capacity l
Carburetor
Fuel Mixture Mixing Ratio with
„CASTROL SUPPER TT" with other two-stroke oils
Air filter
Ignition
Sound Pressure level (EN 27 917)
Noise Emission Level LWeq according to EN ISO 3774* measured db(A)
Noise Emission Level LWeq according to EN ISO 3774* garanteedd db(A)
Medium Oscillation Acceleration Value acc. to ISO 7916
roght handle at max. permissable RPM
Weight (operational but without fuel)
Air volume**- Air volume m3/h - Air velocity m/s 61053
Dimensions mm without tube
Dimensions mm with tube
Idle RPM speed
Max. permissible RPM

12. Accessories

Refitting set vacuum fixture for blower 440,
Carrying strap for blower 440,
Spark protective grate for noise suppressor,

13. Guarantee

SOLO guarantees problem-free quality and will assume the costs for defect remediation by replacing the defective parts
in the case of material or manufacturing defects that occur within the guarantee period after the date of purchase.
Please note that specific guarantee conditions apply in some countries. Ask your sales person if you have any questions. As vendor of the
products he is responsible for the guarantee.
We request your understanding that no guarantee can be assumed for damages due to the following:
• Non-compliance with the operating instructions.
• Neglecting required maintenance and repair work.
• Damage through inappropriate use of the equipment, in particular damage through the intake of hard objects, such as
gravel, metallic objects and similar, for which the equipment is not designed.
• Damages due to improper carburetor adjustment.
• Normal wear and tear.
• Obvious overload through persistently exceeding the upper performance limits.
• Using non-approved tools and cutting fixtures.
• Using non-approved cutting bar and chain lengths in the case of chain saws.
• The use of force, improper handling, misuse, or accident.
• Damages caused by overheating due to dirt build up on the ventilator casing.
• Intervention by non-specialized persons, or improper repair attempts.
• The use of unsuitable replacement parts or parts other than SOLO original parts to the extent that they cause damage.
• Using unsuitable fuel or fuel that has been stored too long.
• Damages that can be traced to implementation conditions from the rental business.
Cleaning, care, and adjustment work are not recognized as guarantee performances. All guarantee work must be carried out by a SOLO dealer.
In the interest of consistent further device development we must reserve the right to make changes to the product in form, technology, and
fittings. We request your understanding for the fact that no claims can be derived from the information and diagrams of these instructions.
22
440
SOLO one-cylinder, 2-cycle engine
all-position diaphragm carburetor with primer and integrated fuel pump
1:50 (2%) / 1:25 (4%)
Foam filter
electronically controlled magneto ignition, maintenance free
at handle 1,9
4,1 kg
760
315 / 260 / 380
970 / 260 / 380
= 3000 RPM
= 7200 RPM
441
29
0,34
94
104
105
At left handle: 2,5
At right handle: 3,0
5,3 kg
630
315 / 260 / 380
1100 / 1130 / 600
order no.: 49 00 546
order no.: 49 00 159
order no. 20 48 378

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

441

Inhaltsverzeichnis