Ce Declaration Of Conformity; Foreword; Operating Parts And Functional Parts - Solo 440 Gebrauchsanweisung

GB
Operating instructions
Attention:
Read these operating instructions
carefully before placing in service and
comply with the safety directives!
Content overview
1. CE Declaration of Conformity
2. Foreword
3. Operating parts and functional parts
4. Safety directives
4.1 General safety instructions
4.2 Work clothing
4.3 Refueling
4.4 When transporting the device
4.5 Before starting
4.6 When starting
4.7 When working
4.8 Vibrations
4.9 For maintenance and repair
5. Assembly/disassembly
5.1 Blower assembly (440)
5.2 Removing blower tube (440)
5.3 Vacuum shredder assembly (441)
5.4 Remove manifold (441)
5.5 Remove vacuum tube (441)
6. Fueling
6.1 Fuel information
6.2 Mixing ratio
6.3 Filling fuel
7. Start motor/stop motor
7.1 Start preparations
7.2 Starting
7.3 If the motor does not start
7.4 When the motor starts
7.5 Turning off the motor:
8. Using
8.1 Blower 440
8.2 Vacuum shredder441
9. Operating and maintenance instructions
9.1 General operating instructions
9.2 The starting fixture
9.3 Carburetor adjustment
9.4 Sparkplug information
9.5 Cleaning the air filter
9.6 Noise suppressor instructions
9.7 Shutdown and storage
9.8 Maintenance plan
10. Parts subject to wear and tear
11. Technical data
12. Accessories
13. Guarantee

1. CE Declaration of Conformity

in accordance with EC directives 98/37 EC, 2000/14/EC
and 89/336/EWG (amended with 92/31/EWG),
SOLO Kleinmotoren GmbH, Stuttgarter Strasse 41,
D-71069 Sindelfingen, being solely responsible, states that
the product referred to in this declaration complies with
the requirements of the machinery guidelines.
This Declaration of Conformity will become invalid if the
product is modified, changed or altered without prior approval.
page
Guaranteed sound power level (DIN45635) 105 dB(A)
Measured sound power level (DIN45635) 104 dB(A)
13
13
Sindelfingen, 1
13
SOLO Kleinmotoren GmbH
14
14
14
14

2. Foreword

15
15
15
We congratulate you on the purchase of
15
your new high-quality SOLO product and
16
hope that you are satisfied.
16
A single-cylinder, two-stroke motor with
16
nickel-coated cylinder in proven SOLO
16
technology insures high performance and
16
low fuel consumption and high machine
17
serviceability.
17
SOLO constantly strives to continuously
17
develop its products. Consequently Solo
17
must reserve the right to make changes in
17
form, technology and fittings.
18
18
No claims can be derived from the illustra-
18
tions or information contained in these
18
operating instructions.
18
To maintain the function and the perform-
19
ance of this power tool over a long period
19
of time you should precisely comply with
19
the operating and maintenance instructions.
19
If you should have further questions after
19
studying these operating instructions,
19
your dealer would be pleased to help you.
19
19
20
20
20 3. Operating parts and functional
20
parts
21
21
21 1. Starter shutter
21
2. Sparkplug cover
22
3. Hand throttle
22
4. Stop switch
22
5. Catch
6. Noise suppressor
7. Handgrip
8. Fuel tank filler cap
st
January 2002
Wolfgang Emmerich
Managing Director
9. Starter grip
10. Air filter
11. Primer
12. Carrying strap eyelet
13. Blower nozzle
14. Blower tube
15. Gas pre-select lever
16. Blower cover 13