Creating And Saving Graphs Of Measurements; Instrument General Menu - HT 64 Bedienungsanleitung

4.3.6. Creating and saving graphs of measurements

1. Press the F1 key to enter the section for creating a graph of the quantity to be
measured (see Fig. 8
2. Press the F2 (Fast) or F3 (Slow) key to set the sampling interval the instrument will
use as a reference when creating the graph. You can choose among the following
values: 0.2s, 0.5s, 1.0s, 2.0s, 5.0s, 10s
3. Press the F1 key to start creating the graph. The measuring range (automatically
inserted by the instrument) and the real-time value are displayed by the instrument
(see Fig. 8 central part).
–
4. Press the F4 key to end the graph.
5. Press the F1 key to save the graph in the instrument
new graph (see Fig. 8

4.3.7. Instrument general menu

1. With a measurement on the display (see Fig. 9
enter the instrument
the display.
Saving measurements
2. Press the F1 (ENTER) key to save the measurement.
Recording data (Logger)
3. Use the F2 or F3 key to select symbol
side).
Fig. 8: Creating and saving a graph of measurements
left side).
–
right side).
–
s general menu. The screen (see Fig. 9
'
Fig. 9: Instrument general menu
Fig. 10: Setting data recording
s memory or the F4 key to start a
'
left side), press function key F3 to
–
Record and press the F1 key (see Fig. 10
" "
EN - 10
right side) is shown on
–
HT64
left
–