Instructions For Use - Hafele Dialock Montage- Und Kurzanleitung

Instructions for use

Assignment of locking rights to user keys
1. Hold the green programming key in front of the operating panel.
2. The green LED display flashes.
3. Hold the user key being taught in front of the operating panel within
5 seconds. The green LED lights up to indicate that the locking right for
the user key has been assigned.
4. Remove the user key taught.
5. Hold the next user key in front of the operating panel within 5 seconds.
If no further user keys are held in this position, the electronics switch
off automatically.
6. If the red LED display lights up, an error has occurred. Repeat the
assignment process.
Withdrawing locking rights of a single user key
1. Hold the red deletion key in front of the operating panel. The red LED
indicator flashes.
2. Hold the user key to be cancelled in front of the operating panel.
3. The red LED indicator flashes briefly. The locking entitlement is cancel-
led.
Withdrawing locking rights of all user keys
When one user key is lost and should have no further locking entitlement,
all the user keys in the scanning module must be cancelled. Following
this, all user keys must be re-assigned their right of access.
1. Hold the red deletion key in front of the operating panel. The red LED
indicator flashes.
2. Hold the green programming key in front of the operating panel. The
red LED indicator flashes briefly.
3. Re-assign rights of access to all the desired user keys.
Mounting and Brief Operating Instructions
english 25